- Stainless Steel Anchor Chain
- Manganese Steel Lifting Chain Grade 80
- Manganese Steel Lifting Chain
- Hastelloy Round Bars
- Hastelloy Sheet
- Hastelloy steel pipe
- Stainless steel wire rope
- Stainless steel round
- Stainless steel hexagonal rod
- Stainless steel strip
- Plastic coating wire rope
- Stainless steel plate
- Stainless steel angle
- Stainless steel pipe
- Stainless steel wire
- Stainless steel flange
- Stainless steel channel
- Stainless steel flat steel
410 Brushed stainless steel flat bar: surface treatment, beautiful and non-slip
410 stainless steel flat bar
410 stainless steel is a martensitic stainless steel with moderate corrosion resistance, good machinability, and excellent strength and hardness. When formed into flat bar form, it becomes 410 stainless steel flat bar, widely used in various applications requiring high strength and wear resistance.
Features
Corrosion Resistance: 410 stainless steel has relatively good corrosion resistance, especially in atmospheric air, water vapor, and mild acid environments. However, its corrosion resistance is lower than that of austenitic stainless steels such as 304 and 316.
Strength and Hardness: Through heat treatment (such as quenching and tempering), 410 stainless steel can achieve high strength and hardness, making it ideal for applications requiring high stress resistance.
Magnetism: 410 stainless steel is magnetic and can be easily identified by magnets.
Machinability: It has good machinability and can be easily processed by turning, milling, drilling, and other processes.
Heat treatment: 410 stainless steel can be heat treated to adjust its mechanical properties, such as increasing hardness through quenching and increasing toughness through tempering.
Common Applications：
Knives and Cutlery: Due to its high hardness and wear resistance, it is often used to make blades, scissors, and other products.
Machinery Parts: Such as shafts, bolts, nuts, pump shafts, and valve components.
Petrochemical and Chemical Equipment: It can be used as equipment components in environments where corrosion resistance is not a high requirement.
Construction and Decoration: It is used to manufacture frames, brackets, and other structural parts requiring both strength and aesthetics.
410 Stainless Steel Flat Bar Spections
| Specification: | A276/484 / DIN 1028 |
| Material: | 303 304 316 321 410 420 |
| Stainless Steel Round Bars: | Outside Diameter in the range of 4mm to 500mm |
| Width: | 1mm to 500mm |
| Thickness: | 1mm to 500mm |
| Technique: | Hot Rolled Annealed & Pickled (HRAP) & Cold drawn & Forged & Cut Sheet and Coil |
| Length: | 3 to 6 Meters / 12 to 20 feet |
| Marking: | Size, Grade, Manufacture name on Each Bars/Pieces |
| Packing: | Each steel bar has the singal, and several will be bundled by weaving bag or as per requirement. |
Stainless Steel 410 Flat Bars Equivalent Grades
| STANDARD | JIS | WERKSTOFF NR. | AFNOR | BS | GOST | UNS |
| SS 410 | SUS 410 | 1.4006 | Z12C13 | 410 S21 | - | S43000 |
410 Flat Bars Chemical Composition and Mechanical properties(saky steel)
| Grade | C | Mn | Si | P | S | Cr | Ni |
| SS 410 | 0.15 max | 1.0 max | 1.0 max | 0.040 max | 0.030 max | 11.5 – 13.5 | 0.75 |
| Tensile Strength | Yield Strength (0.2%Offset) | Elongation(in 2 in.) |
| MPa: 450 | MPa – 205 | 20% |
FAQ:
